+++ ice in fuel is now conditional and can be disabled
+++ ATT and STBY mode now work correctly on CIVA
+++ CIVA INS now don't accept coordinates above 89.59.99 N/S and 179.59.99 E/W
+++ added LTN ATT mode
+++ AP automatically disengages, if connected INS shows ATT flag
+++ fixed brakes overheat during replay
+++ autosave file list automatically updates after each save
+++ fixed keyboard capture on the Save/Load EFB page, when FMC is selected
+++ locked default sim AP from turning ON.
+++ fixed SAVE/LOAD page freezing when trying to load autosave, but no files found.
+++ CIVA INS will read previous POS from the saved state file to speed up the alignment process.
+++ CIVA INS now stops alignment if acf is moving during the process
+++ load and fuel calculator inputs are synchronized between 2D and 3D EFB and saved in game save
+++ new failures will not appear during replay
+++ fixed typo on the FE panel (Recirculating fans)
+++ added GPU, gear chokes and doors state into save file
+++ INS Tools now shows correct coordinates format for LTN and INS
+++ LTN now reads previous gyro position to speed up align
+++ added rapid realign function in the LTN
+++ Added STS tests pages for LTN
+++ fixed LTN going back on the previous drift track after RNAV update
+++ APU shuts off above 20000 ft
+++ fixed "Clear waypoints" function in the INS tool, that caused crash
+++ recoded function for reading the apt.dat - now more airports should be stored
+++ Now INS Tools and LTN will fetch correct coordinates from the NAV DB when loading the flightplan
+++ Changed datarefs for Yoke in control logic
+++ Now both AT sw and AP pitch mode sw turns to OFF, when modes are conflicting
+++ changed text on the FMA. "THRESHLD" is now "THR HLD"
+++ TO-FROM flag is now not shown on HSI, when tuned to ILS frequency
+++ fixed bug in the LTN, when trying to save FPL with empty name left INSERT waypoint in the flightplan
+++ fixed bug in the LTN, when inserting waypoints too quickly in the middle of the flightplan, it could erase the next waypoint
+++ added CAT page in the LTN
+++ when reading the flightplan from the file, waypoints are corrected according to NavDB or added into CREW catalog
+++ added ACU
+++ added Galley and chiller switches into the save logic
+++ INS REMOTE state now properly saved
+++ you don't need Beacon ON for Before Start checklist now
+++ tuned cockpit glass reflections a little
+++ AP tuned to handle groundspeed multiplier
+++ Circuit breakers are now checked in checklists
+++ CIV-A and LTN92 now should be able to handle groundspeed multiplier
+++ changed HSI flags logic for INS mode
+++ New OpenGPWS plugin
+++ manuals updated
+++ added supplement fan and gasper switches into saving