+++ tiller axis will control nosewheel when active as an addition to any selected steering option
+++ FMC can control COURSE (OBS) now
+++ Added panel for TCAS range selection
+++ changed ACU logic to prevent extreme temperatures in cabins
+++ added option for disabling Flight Attendant PA (FA PA)
+++ when FMC selected, INS uses GPS data, gets initial POS automatically and forced to align quickly.
+++ Added Sim Pause settings for the AFK pilots
+++ fixed checklists logic when it failed to check some lamps at night
+++ Added REF/BRG/DIST waypoint entry method for CAT page of the LTN
+++ fixed TMIX mode in LTN.
+++ TO-FROM flags on HSI when changing 1-DUAL-2 selector
+++ potable water level will slowly decrease in flight
+++ landing gear should stay UP when loading saved game from cold&dark to the saved mid air flight
+++ LTN now properly reads gyro position from saved file
+++ Rapid realign on the LTN now working properly
+++ AP MAN mode is extended with altitude and heading hold functionality
+++ tuned YAW damper to be less aggressive at slow speeds
+++ updated SASL version.
+++ in VR. Yoke will be gradually pushed to center when AP is engaged.
+++ in VR. 3D EFB is locked to show AviTab. Use 2D panel for other pages.
+++ fixed potable water level logic
+++ in VR. Tiller manip always available in VR.
+++ Added hidden button above tiller to center it
+++ fixed GEAR lamp reacting to joystick throttle axis, when AT is ON
+++ fixed bug when Tanker drained fuel instead of adding
+++ removed message windows and replaced them with EFB screen messages
+++ XP12. increased starter torque for faster engine start
+++ removed LuaJIT enabling option. Now it is disabled completely
+++ XP12. corrected engine EGT.
+++ XP12. Added starter fuel controller to correct starting process
+++ Added yoke shaking animation by the Stall Warning system
+++ added command for autobrake selector
+++ added commands for Fuel CutOff levers
+++ added commands for engines ground start
+++ added more commands for AP MSP controls
Version 1.2.6 (March 29th 2024)
+++ ice in fuel is now conditional and can be disabled
+++ ATT and STBY mode now work correctly on CIVA
+++ CIVA INS now don't accept coordinates above 89.59.99 N/S and 179.59.99 E/W
+++ added LTN ATT mode
+++ AP automatically disengages, if connected INS shows ATT flag
+++ fixed brakes overheat during replay
+++ autosave file list automatically updates after each save
+++ fixed keyboard capture on the Save/Load EFB page, when FMC is selected
+++ locked default sim AP from turning ON.
+++ fixed SAVE/LOAD page freezing when trying to load autosave, but no files found.
+++ CIVA INS will read previous POS from the saved state file to speed up the alignment process.
+++ CIVA INS now stops alignment if acf is moving during the process
+++ load and fuel calculator inputs are synchronized between 2D and 3D EFB and saved in game save
+++ new failures will not appear during replay
+++ fixed typo on the FE panel (Recirculating fans)
+++ added GPU, gear chokes and doors state into save file
+++ INS Tools now shows correct coordinates format for LTN and INS
+++ LTN now reads previous gyro position to speed up align
+++ added rapid realign function in the LTN
+++ Added STS tests pages for LTN
+++ fixed LTN going back on the previous drift track after RNAV update
+++ APU shuts off above 20000 ft
+++ fixed "Clear waypoints" function in the INS tool, that caused crash
+++ recoded function for reading the apt.dat - now more airports should be stored
+++ Now INS Tools and LTN will fetch correct coordinates from the NAV DB when loading the flightplan
+++ Changed datarefs for Yoke in control logic
+++ Now both AT sw and AP pitch mode sw turns to OFF, when modes are conflicting
+++ changed text on the FMA. "THRESHLD" is now "THR HLD"
+++ TO-FROM flag is now not shown on HSI, when tuned to ILS frequency
+++ fixed bug in the LTN, when trying to save FPL with empty name left INSERT waypoint in the flightplan
+++ fixed bug in the LTN, when inserting waypoints too quickly in the middle of the flightplan, it could erase the next waypoint
+++ added CAT page in the LTN
+++ when reading the flightplan from the file, waypoints are corrected according to NavDB or added into CREW catalog
+++ added ACU
+++ added Galley and chiller switches into the save logic
+++ INS REMOTE state now properly saved
+++ you don't need Beacon ON for Before Start checklist now
+++ tuned cockpit glass reflections a little
+++ AP tuned to handle groundspeed multiplier
+++ Circuit breakers are now checked in checklists
+++ CIV-A and LTN92 now should be able to handle groundspeed multiplier
+++ changed HSI flags logic for INS mode
+++ New OpenGPWS plugin
+++ manuals updated
+++ added supplement fan and gasper switches into saving
+++ engine anti-ice now works only when engine is running
+++ fixed frozen static port making CADC go wild
+++ turn rate indicators now controlled by Yaw Damper system
+++ engine fuel and oil collected leaks are cleared, when corresponding failure is cleared
+++ added HYD pumps conditional failures
+++ added power logic to the APU Oil QTY gauge
+++ liveries can now contain a config file to store some info. for now it is only a tail number
+++ fixed an issue when saved state file from default livery were loaded, instead of selected
+++ fixed cockpit lamps logic. Added stby lights, reconnected some lamps to correct busses
+++ APU may fail, if attempted to start with no oil
+++ fixed bug with CSD temp rise, when have CSD fail and CSD disconnected
+++ changed animation for CBs
+++ APU FAULT lamp now acts correctly
+++ XP12. tuned APU to turn OFF faster
+++ added SelCal chime sound
+++ added more CBs and edited systems logic for them. Added sounds
+++ added coordinate stickers on all CB panels
+++ cabin altitude resets to airport elevation, when changing location
+++ XP12 added the default heater. Temporarily, until LR fixes the problem
+++ added log messages for conditional failures to specify what caused them
+++ AP captures GS only if NAV (LOC) is already captured
+++ switching from LAND will trip both APs to OFF, if two of them were engaged.
+++ added 2D panel for the LTN CDU
+++ EVAC panel now works from the Hot Bat bus
+++ commanding to Evac, will open all doors if acf is close to the ground
+++ fixed cabin lights in XP12
+++ clocks timers: CHR and ET are now saved in save/load
+++ added manipulators for cabin doors
+++ fixed light intensity of the front panel
+++ tuned engine failures chains
+++ remade bird strike failures. Now it is 5% for each element to be damaged.
+++ added engine stall if high crosswind and too fast throttle advance
+++ added an option for enable/disable conditional fails
+++ added fuel control fail if enough ice built in fuel
+++ ice in fuel makes engines uncontrollable
+++ added engine flameout conditions
+++ changed direction for changing Random fails period setting
+++ APU EGT tuned to reflect its load
+++ added flaps and slats overspeed fail
+++ added landing gear overspeed fail
+++ added fail flags for EPRL indicators
+++ fixed FPS drop in XP12.08, when using custom livery
+++ fixed "starting engine X" callout
+++ fixed Crew VO sound volumes and ON/OFF option
+++ XP11 fixed EPR reading in cruise
+++ fixed AT with default FMC.
+++ random fails period option is increased to 60 min.
+++ added fuel and oil leaks failures
+++ added engine rupture fail
+++ pack 2 should trip when press relief valve opens
+++ EGT rise on custom fires
+++ added visual effects for custom engine fire and compressor stall