The Carenado B58 Baron is required for this product
Custom Engine Model
- 100% custom engine model independent from X-Plane defaults
- Engine monitor
VR Support
- Native Virtual Reality support
Ultra Realistic Flight & Ground Dynamics
- Realistic
stall speeds & behavior
- Realistic
climb speeds
- Realistic
cruise speeds
- Realistic
Weight & Balance
- Realistic
taxi behavior
Complex Damages System
- Triggered
by the pilot actions
- Based
on real world data
- Target
every system in the aircraft
- Meant
to teach you how to correctly manage an airplane
Simulation state saving
- Persistent wear and tear
- Every single switch and lever position is restored when you reload the aircraft
- The battery may discharge if you leave it on and then close X-Plane
- When X-Plane is launched, the engine and oil temperature are restored basing on the time passed
Realistic IO-550-c Engine Simulation
- Automatic startup procedure
- Realistic
propeller animations as never seen before on X-Plane
- Realistic
differencies between the engines
- Different throttle/propeller/mixture setting required for each
engine
- Different CHTs and oil temperatures
- Realistic
engines synchronization
- Custom
propeller governor
- Correct
fuel consuption
- Cowl
Flaps Drag
Oil
System:
- Realistic oil viscosity
- Interchangeable oil type
- Oil pump failures
- Realistic oil filter
Injection
Fuel System:
- Realistic fuel pump behavior
- Realistic
fuel filter
- Interchangeable
spark plugs: default or fine-wire
- Spark
plugs fouling
- Realistic
Lean of Peak and Rich of Peak operations
Starter
- Realistic
startup procedure
- Realistic
engine temperatures
- Vapor
Lock Simulation
- Fuel
Flooding simulation
- The
engine parts are damaged if not managed correctly
Engine Preheater and Winterization Kit
- The
engine may be warmed up upn start with the provided electrical heater
- Once
activated, the electrical heater runs even when you close the simulator
- A
winterization kit let the airplane to operate at very cold temperatures
Realistic Landing Gear
- The
landing gear is damaged by hard landings and overspeed operations
- The
brakes and tires are damaged if not managed correctly
Electrical & Avionics System
- Realistic
Battery
- The
avionics are damaged if on when the engine starts/shuts down
Learn with the in-flight tips
- A non
invasive tip with a suggestion about the conduct of the flight is shown when
you are
not flying the airplane properly
- A non
invasive tip with a suggestion on how to recover the problem is shown when you damage
the airplane
New
- Custom stall warning horn
- Gyro drift simulation
Economic System
- Can be enabled/disabled on the fly
- Earn virtual money when you fly
- Use virtual money to buy fuel and do maintenance/repairs
- Realistic fuel prices around the World
- Can be used parallel to FSEconomy. Soon fully compatible with FSEconomy systems.
- More info at https://www.simcoders.com/reality-expansion-pack/economy
Simulation of Hypoxia
- Tunnel
Vision
- Hard
Breathing
Stunning sounds
- 3D sounds (custom FMOD-like sound engine)
- Realistic
engine clicks and stutters
- Realistic
engine humming sounds when the engines are not synchronized
- Fuselage
wind sound
- Landing
gear wind
- Independent
touch down sounds
- Real
avionics sound
- Realistic
open window wind sound
Interactive Walkaround
- Cockpit
checks
- Aileron,
rudder, elevator and flaps check
- Tire
check and choks removal
- Tie-down
removal
- Pitot
tube check
- Engine
cowl check
- Fuel
quantity check
- Oil
quantity and quality check
- Lights check
- Postflight walkaround
Interactive towing
- Push,
pull and steer using the joystick
- Towbar
simulation
Weight & Balance Tool
- Load
the airplane and check the C.G. and weight limits at takeoff and landing
- The
airplane behavior changes when the C.G. moves
Popup Kneeboard
- Complete
normal operations checklist
- Complete
emergency operations checklist
- Complete
reference tables (speed, fuel consumption etc.)
- May be
shown/hidden with mouse gestures
Maintenance Hangar
- Engine
maintenance tab
- Electrical
systems maintenance tab
- Landing
gear, brakes & tires tab
HeadShake Integration
- REP
drives HeadShake to simulate the correct vibrations of the Continental IO-550-C engine
Avionics
- Realistic gyro wander and HSI behavior
Very easy on FPS
Written
in C++: no compromises
Complete description of the features
Developed by real pilots
The
SimCoders.com team is made by real pilots. We code all our own flight
experience
into
REP and try to provide you the most amazing experience in X-Plane.
Realistic and complex engine logic
The
engines are meticulously reproduced. The oil system, the fuel system, the
starter, the fuel
pump, the electrics and all other components are simulated one by one, basing
on the
handbook data.
You
can change oil type basing on the current season, check the fuel filter, the
cylinders compressions
and so on. Every single part is simulated basing on real world data.
The
most amazing feature of this twin-engine is the engines' droning sound when
they are
out of sync. The RPM difference between the engines shakes the fuselage and the more
the propellers are out of sync, the faster is the droning sound.
Real Baron systems
Among
other systems, you find the landing gear system, the oxygen system, the braking system,
the electrical system and the avionics. Each system is reproduced basing on the pilot operating
handbook and on our personal experience.
Ultra Realistic Flight & Ground Dynamics
A
custom flight dynamics engine is replacing part of the internal X-Plane engine
in order to
enhance the realism of the simulation. You will experience realistic speeds and
fuel consumptions
at every power setting.
The
correct drag during the landing gear operation is realistically simulated.
The
aircraft uses the correct distances to takeoff and landing and reaches the
correct vertical
speed during climb.
The
plugin automatically corrects the faulty cross-wind behavior of X-Plane to let
you experience
a realistic ground roll.
Damages System
A
reckless flier will experience many failures based on the real Pilot's
Operating Handbook.
Interactive pre-flight checklist and walkaround
Do
your ground pre-flight checks using the interactive walkround module. Check the wheel
status, the elevators, the aileron and the rudder. Remove the choks and the
tiedowns.
Towing system
Tow
your airplane in and out of the hangar or move it along the airport using the integrated
towing system. A towing bar will help you steering the nose wheel.
The
software will also teach you how to avoid those failures through many custom
messages
that may be shown during flight.
Weight & Balance tool
Checking
the Weight & Balance is a very important operation that real pilots do every time
they
board an aircraft.
Thanks
to the W&B tool you can load your airplane and check that the plane's
weight and center
of gravity are within limits. The changes affect the way the airplane flies.
With
REP you can now see how the Center of Gravity of the B58 moves back while
burning
fuel.
Popup kneeboard
Follow
the real Normal Operations Checklists to fly the airplane. Use the Emergency Checklist
when you experience a failure. Plan your flight basing on the real performance tables.
The
popup kneeboard is easy to use and contains all the informations you need to conduct
your flight.
Living Airplane
The
airplane state is saved and then restored when the simulator is restarted.
An
example? After loading your airplane into X-Plane, it will have a warm engine depending
on how much time has passed from the last session.
HeadShake integration
If you
install HeadShake v1.5 or higher in your system, it will communicate with REP
to extend
the simulation realism.
REP
will drive HeadShake to simulate the vibrations of the real IO-550-C engines.
Using this,
you will be able to run the engine at the most comfortable RPMs.
Maintenance Tool
Use
the included maintenance tool (also called Hangar View) to perform the
maintenance of
your aircraft. Change the oil, check the cylinders status, recharge the battery
and more.
Realistic sounds set
Feel
the wind flowing around the fuselage, the landing wheels screech during an hard landing,
the brakes squeaking and many more. The included sounds have been recorded on-board
a real aircraft.
Custom settings window
A
settings window allows you to enable or disable some of the software's
features.
And much, much more!
You will discover
something new about the Beech Baron every time you jump onboard.
More pictures here