by Thranda is required for this add-on. It will not work on other aircraft, it will not work on the new Daher Kodiak 100
### Extended features list
#### Developed by real pilots
The SimCoders.com team is made by real pilots. We code all our own
flight experience into REP and try to provide you the most amazing
experience in X-Plane.
#### Realistic and complex engine logic
The engine is meticulously reproduced by enhancing the new PT-6 turbine
model introduced by Laminar in X-Plane 11.
We started from the base model and override those parts of the engine
that needed some pimps to reach perfection.
#### Ultra Realistic Flight & Ground Dynamics
A custom flight dynamics engine is replacing part of the internal
X-Plane engine in order to enhance the realism of the simulation. You
will experience realistic speeds and fuel consumptions at every power
setting.
The correct drag during the landing gear operation is realistically
simulated.
The aircraft uses the correct distances to takeoff and landing and
reaches the correct vertical speed during climb.
The ground dynamics are enhanced by a realistic cross wind behavior.
#### Damages System
If you are a reckless flier you will experience many failures based on
the real Pilot's Operating Handbook.
#### Interactive pre-flight checklist and walkaround
Do your ground pre-flight checks using the interactive walkround module.
Check the wheel status, the elevators, the aileron and the rudder. Remove the choks and the tie-downs.
#### Popup kneeboard
Follow the real Normal Operations Checklists to fly the airplane. Use the Emergency Checklist when you experience a failure. Plan your flight basing on the real performance tables.
The popup kneeboard is easy to use and contains all the informations youneed to conduct your flight.
#### Living Airplane
The airplane saves its state and restore it when you restart the simulator.
An example? After loading your airplane into X-Plane, it will have a warm engine depending on how much time has passed from the last session.
#### HeadShake integration
If you install HeadShake v1.5 or higher in your system, it will communicate with REP to extend the simulation realism.
#### Maintenance Tool
You can perform the maintenance of your aircraft using the included maintenance tool (also called Hangar View). Change the oil, check the cylinders status, recharge the battery and more.
#### Realistic sounds set
Feel the wind flowing around the fuselage, the landing wheels screech during an hard landing, the brakes squeaking and many more. The included sounds are recorded on-board a real aircraft.
#### Custom settings window
A settings window allows you to enable or disable some of the software's features.
#### And much, much more!
You will discover something new about the Kodiak everytime you jump
onboard it!