This REP is for the default B58 included in X-Plane 11. No other purchase required
Ultra Realistic Flight & Ground Dynamics
stall speeds & behavior
Weight & Balance
- Native Virtual Reality support
Complex Damages System
by the pilot actions
on real world data
every system in the aircraft
to teach you how to correctly manage an airplane
Simulation state saving
- Persistent wear and tear
- Every single switch and lever position is restored when you reload the aircraft
- The battery may discharge if you leave it on and then close X-Plane
- When X-Plane is launched, the engine and oil temperature are restored basing on the time passed
Realistic IO-550-c Engine Simulation
- 100% custom engine model independent from X-Plane default
- Engine monitor
- Automatic startup procedure
propeller animations as never seen before on X-Plane
differencies between the engines
- Different throttle/propeller/mixture setting required for each
- Different CHTs and oil temperatures
- Realistic oil viscosity
- Interchangeable oil type
- Oil pump failures
- Realistic oil filter
- Realistic fuel pump behavior
spark plugs: default or fine-wire
Lean of Peak and Rich of Peak operations
engine parts are damaged if not managed correctly
Engine Preheater and Winterization Kit
engine may be warmed up upn start with the provided electrical heater
activated, the electrical heater runs even when you close the simulator
winterization kit let the airplane to operate at very cold temperatures
Realistic Landing Gear
landing gear is damaged by hard landings and overspeed operations
brakes and tires are damaged if not managed correctly
Electrical & Avionics System
avionics are damaged if on when the engine starts/shuts down
Learn with the in-flight tips
- A non
invasive tip with a suggestion about the conduct of the flight is shown when
not flying the airplane properly
- A non
invasive tip with a suggestion on how to recover the problem is shown when you damage
New in v3+
- Custom stall warning horn
- Gyro drift simulation
Simulation of Hypoxia
- 3D sounds (custom FMOD-like sound engine)
engine clicks and stutters
engine humming sounds when the engines are not synchronized
touch down sounds
open window wind sound
rudder, elevator and flaps check
check and choks removal
quantity and quality check
- Lights check
- Postflight walkaround
pull and steer using the joystick
Weight & Balance Tool
the airplane and check the C.G. and weight limits at takeoff and landing
airplane behavior changes when the C.G. moves
normal operations checklist
emergency operations checklist
reference tables (speed, fuel consumption etc.)
- May be
shown/hidden with mouse gestures
systems maintenance tab
gear, brakes & tires tab
drives HeadShake to simulate the correct vibrations of the Continental IO-550-C engine
- Realistic gyro wander and HSI behavior
- Can be enabled/disabled on the fly
- Earn virtual money when you fly
- Use virtual money to buy fuel and do maintenance/repairs
- Realistic fuel prices around the World
- Can be used parallel to FSEconomy. Soon fully compatible with FSEconomy systems.
- More info at https://www.simcoders.com/reality-expansion-pack/economy
Very easy on FPS
in C++: no compromises
Complete description of the features
Developed by real pilots
SimCoders.com team is made by real pilots. We code all our own flight
REP and try to provide you the most amazing experience in X-Plane.
Realistic and complex engine logic
engines are meticulously reproduced. The oil system, the fuel system, the
starter, the fuel
pump, the electrics and all other components are simulated one by one, basing
can change oil type basing on the current season, check the fuel filter, the
and so on. Every single part is simulated basing on real world data.
most amazing feature of this twin-engine is the engines' droning sound when
out of sync. The RPM difference between the engines shakes the fuselage and the more
the propellers are out of sync, the faster is the droning sound.
Real Baron systems
other systems, you find the landing gear system, the oxygen system, the braking system,
the electrical system and the avionics. Each system is reproduced basing on the pilot operating
handbook and on our personal experience.
Ultra Realistic Flight & Ground Dynamics
custom flight dynamics engine is replacing part of the internal X-Plane engine
in order to
enhance the realism of the simulation. You will experience realistic speeds and
at every power setting.
correct drag during the landing gear operation is realistically simulated.
aircraft uses the correct distances to takeoff and landing and reaches the
speed during climb.
plugin automatically corrects the faulty cross-wind behavior of X-Plane to let
a realistic ground roll.
reckless flier will experience many failures based on the real Pilot's
Interactive pre-flight checklist and walkaround
your ground pre-flight checks using the interactive walkround module. Check the wheel
status, the elevators, the aileron and the rudder. Remove the choks and the
your airplane in and out of the hangar or move it along the airport using the integrated
towing system. A towing bar will help you steering the nose wheel.
software will also teach you how to avoid those failures through many custom
that may be shown during flight.
Weight & Balance tool
the Weight & Balance is a very important operation that real pilots do every time
board an aircraft.
to the W&B tool you can load your airplane and check that the plane's
weight and center
of gravity are within limits. The changes affect the way the airplane flies.
REP you can now see how the Center of Gravity of the B58 moves back while
the real Normal Operations Checklists to fly the airplane. Use the Emergency Checklist
when you experience a failure. Plan your flight basing on the real performance tables.
popup kneeboard is easy to use and contains all the informations you need to conduct
airplane state is saved and then restored when the simulator is restarted.
example? After loading your airplane into X-Plane, it will have a warm engine depending
on how much time has passed from the last session.
install HeadShake v1.5 or higher in your system, it will communicate with REP
the simulation realism.
will drive HeadShake to simulate the vibrations of the real IO-550-C engines.
you will be able to run the engine at the most comfortable RPMs.
the included maintenance tool (also called Hangar View) to perform the
your aircraft. Change the oil, check the cylinders status, recharge the battery
Realistic sounds set
the wind flowing around the fuselage, the landing wheels screech during an hard landing,
the brakes squeaking and many more. The included sounds have been recorded on-board
a real aircraft.
Custom settings window
settings window allows you to enable or disable some of the software's
And much, much more!
You will discover
something new about the Beech Baron every time you jump onboard.
More pictures here