Base Plugin Version 3.1.10 (October 24th 2022)
Changelog:
New: GroundService initial support for XP12 new weight station. The aircraft should also be configured for the new weight station features for loading to work correctly.
Update: Added stock citation fuel config
Update: Toliss A319/A321 configs for compatibility with XP11 and XP12
SAM GroundService & FollowMe are now compatible with X-Plane 12 (EA).
SAM WorldJetways & AirportVehicles are still compatible with X-Plane 11 only.
Base Plugin Version 3.1.8 (July 6th 2022)
Fix: Dataref control icon not showing on SAM UI toolbar when arriving at an airport with custom datarefs implemented
Fix: GroundService baggage slider not movable when importing a Simbrief flightplan that's using a custom airframe with baggage weight defined as 0. Now the unit baggage weight will be set to aircraft's configured default as long as the imported unit pax weight != 0
New: Implemented audio announcement when (un)loading process is finished. Requires GroundSevice v1.0.3
New: Visual only mode; aircraft loadout & datarefs will not be touched in this mode, GS will only show the animations. The flag can be configured from GroundService settings page
Base Plugin Version 3.1.6 (May 19th 2022)
Fix: Fixed a possible cause for the jetway sound still playing after disconnecting
Fix: Fixed departure & parking states not refreshed when reloading a flight on the same airport
Fix/tune: Tuned departure spawn point logic to prevent vehicle spawning at the opposite end of the terminal when requesting departure guidance from a ramp
Aircraft config updates:
- Fix/tune: Tuned departure spawn point logic to prevent vehicle spawning at the opposite end of the terminal when requesting departure guidance from a ramp
- Felis B742: deleted Felis B742 gpu in favor of the new Felis tablet options
New aircraft config:
Base Plugin Version 3.1.5 (April 27th 2022)
- New: Implemented optional secured/release state dataref/command triggers
- Change/Fix: Improved airport detection accuracy by dropping support for helipads & seabases as SAM currently doesn't handle them yet
- Change: Tweaked how the empty weight of aircraft is calculated. It's now possible to add an extra weight that would be added to the value taken from .acf file/dataref, configured per-aircraft in the XML.
- Change: Reduced vehicle roll effect when turning a bit
- Fix: SimBrief import tweaks to make imported weight config closer to SimBrief's values
- Fix: Fixed Catering & Passenger services not emitting (un)loading events causing ToLiss loading to fail sometimes
- Fix: Incorrect CateringService custom logic causing loading to not be completed in certain cases
- Fix: Fixed an edge case where stair-mapped buses may be spawned before Crew & Cleaning services has finished
- Fix: Fixed edge cases where ground handling vehicles may appear after (un)loading is finished
- Aircraft config updates:
- ToLiss A319: implemented chock triggers
- ToLiss A321: updated pax/baggage weight & fuel tank capacity, added base extra weight config, implemented chock triggers
- ToLiss A340: added base extra weight config, implemented chock triggers
- iniBuilds A300 v2 PAX: Corrected vehicle docking positions
- iniBuilds A300 v2 CARGO: Added fuel service
- FlightFactor A350: updated vehicle docking positions
- Felis B742: fixed vehicle clipping issue
- Rotate MD11: fixed chock positions
- X-Crafts E175/195: updated cargo service speed
- Magknight B789: corrected vehicle & chock positions
- New aircraft config:
- X-Hangar G550
- Other minor fixes
Base Plugin Version 3.1.4 (April 11th 2022)
New: GroundService options overlay that includes CG adjustment slider
New: Implemented custom loading event hooks for Toliss A319, A321 & A340 aircraft for better support
Change: Fuel slider is now hidden when tank configuration is not found for the acf
Fix: Fixed several issues relating to refueling
Fix: PAX deboarding when SAM jetway is still moving
Fix: Issues with carts not returning on some configurations
Version 3.1.1 (April 4th 2022)
Change: Ground Service Auto parking config is now removed, users will need to choose between Stairs or Jetway configuration when loading/unloading
Fix: Ground Power custom command executed continuously, it's now only executed once when it's changed
Fix: Manual input of load service weight issue when the input value exceeds slider range
Fix: Rotate MD80 pylon position, GPU connection & cargo train route
Fix: Toliss A346 crew car return routing
Fix: Relaxed 2nd cargo loader spawning time for Toliss A321
New: Added JustFlight BAE 146 Series
New: Support for the new Ground Service extension
New: Preliminary X-Plane 12 support
New: New aircrafts supported
Rotate MD-11
JF BAe 146-100
Carenado Fokker F50
X-Crafts E175
X-Crafts ERJ 145XR
Carenado C90 GTX
Felis B747-200
Magknight 787-8 Dreamliner
Leading Edge Simulations Saab 340A Cargo
FJS B732
FlyJSim Q4XP
Fix: Possibility of incorrect VDGS detection when 2 opposite-facing docks are next to each other (back-to-back)
Fix: Unsafe pointer usage causing VDGS to not work completely under certain circumstances
Fix: SimBrief payload import gets truncated most of the time
Fix: Departure follow me runway selection bug, where runway and holding point selection state was not correctly initialized
Fix: macOS: Extension linking not working when target path already exists
Other internal bugfixes & optimizations
Please replace the existing file of SAM WorldJetways/AirportVehicles/FollowMe with the latest one.
New: Added door configurations for LevelUP 737 aircrafts
New: Added auto/manual aircraft door animation setting to BasePlugin settings page
New: (Re)Added static aircraft door coordinates
Change: Content manager icon is now red instead of blue when updates are available
Fix: macOS stand-alone Content Manager pixel ratio issue where the app window will be initialized to a very large size when the screen resolution is set to a non-native value
Fix: FollowMe regression bug where landing always trigger an override of planned runway and parking position
Fix: FollowMe departure holding point list issues:
Setting the departure runway from PLAN page not updating runway holding points
On airports with multiple runways, the holding point list may not initially be in sync with the starting runway
Other internal bugfixes
New: Implemented SAM3 dock debug lines
Fix/Change: TextFields now no longer auto-accepts typed value after a certain timeout, users will need to either press Enter or click outside it. This is done to fix timing issues that resulted in some users having difficulty entering values under some conditions.
Fix: FollowMe parking still offering parking guidance when the current airport doesn't have any taxi network defined
Fix: FollowMe departure sometimes not working after the first airport load
Tuning: A346 door positions
Fix: Relaxed TextField debounce timer a little bit to give users more time to type
[ITEMPRICE]